On Load Changeover Switches Compact Version
NUCON range of co-series compact version On load Changeover swiches are manually front operated four pole switches with very compact design which helps to save the space in panel boards resulting in low csting of panel boards. These comprise of two On Load Switch Disconnectors, which are coupled together and are mechanically interlocked with common outgoing. These are used in low voltage distribution circuits and motor circuits and motor circuits and at places where continuity of supply is necessary for switching from main supply to an alternate source of supply and vice versa.

ALL CO-SERIES Switches are capable of making, carrying & breaking currents under normal circuit conditions, which may include operating under overload conditions and also carrying currents under specified abnormal circuit conditions such as short circuit for a specified time.

Conformity To Standards
Conforms to IEC - 60947 - 1 & 3, IS - 13947 - 1 & 3

Range & Frame Size
Current range 40 A to 3150 A in nine frame sizes in Four Pole in Open Execution & thick Sheet Steel Enclosure

SIZE 1 40A, 63A
SIZE 2 80A, 100A
SIZE 3 125A
SIZE 4 160A, 200A
SIZE 5 250A, 320A
SIZE 6 400A, 630A
SIZE 7 800A
SIZE 8 1000A, 1250A, 1600A
SIZE 9 2000A, 2500A, 3150A
Specifications
Rated Operational Voltage (V) : 415
Rated Insulation Voltage (Ui) : 1000 V
Rated Frequency (Hz) : 50/60
Utilization Category : AC 23 A
Rated impulse withstand Voltage (Uimp) : 10 KV


Salient Features
  • While breaking the circuit, guaranteed sufficient air sectioning clearance.
  • Utilization category - AC 23A.
  • Strong endurance and resistance to heat (Tropicalised).
  • Flag indicator for two stable positions (I-O) & possible switching on or off, on load, there by fulfilling the roll of switching device.
  • All current carrying parts are of special grade E.T.P. Copper and with silver plated.